The good news is that this device is designed to work with Asterisk, integrating perfectly with Zaptel/libpri to deliver a superb PRI solution with up to 30 voice channels in a single span

Available either as a standalone card for your own PABX project, or integrated into one of our own ready configured systems.

technical specification

Power: 520mA at +5v
MTBF: > 1 Million hours (Calculated).
PCI 32 bit (5v and 64 bit (3.3v) compatible.
Temperature range: 0 - 45C.
All set-up and configuration is in software or by machine BIOS.
DSU/CSU set up entirely in software.
Line decoding: HDB3, AMI, B8ZS.
Framing: CRC4, non-CRC4, ESF, D4T1/E1.
Clocking mode: Normal , Master.
Software controlled DSU/CSU test modes.
Remote monitoring of card and CSU/DSU operation.
Dimensions: 2U Form factor: 120mm x 55 mm.

t1/e1 status alarms

ALOSV: Loss of Signal alarm
LOS: Receive Loss of Signal
ALTLOS: Alternate loss of Signal Status OOF: Out of Frame
RED: Telco Red Alarm condition
AIS: Alarm Indication Signal
OOSMFV: Loss of Signaling Multiframe
OOCMFV: Loss of CRC Multiframe
OOOFV: Out of Off-Line Frame
RAIV: Receive Loss of Signal
YEL: Receive Telco Yellow Alarm

line protocols

ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Pricing

A101 £376.00 (£320.00+VAT)

Delivery options from £9.39 inc VAT for most UK destinations (actual cost may depend on destination and will be calculated once you enter the delivery address and prior to confirming the order).

Reseller? - we welcome reseller enquiries on all our products and services. If you already have a reseller account, please login to my ipcortex to view reseller pricing and benefits. Alternatively, please Contact Us or call our reseller hotline on 01908 276656

For help and advice with any networking issues or challenges you face feel free to call us on 0845 644 2805 and we will be happy to help you. Alternatively, send us a message via our Contact Us page.

site map